Gas Regulators
A gas regulator is a crucial accessory on your residential or commercial property. Gas regulators control and maintain a defined pressure by cutting the flow of gas from a high-pressure cylinder. Regulators also act as valves that automatically cut the gas supply when the desired pressure is reached.
Gas is a highly flammable compound, so purchasing your equipment from a reputable dealer is crucial. At Western Water and Gas Products, we offer a wide variety of high-quality gas regulators. Furthermore, our technical experts can recommend the ideal regulators for your equipment and systems.
Types of Gas Regulators
There are many different gas regulators on the market. Their differences primarily come down to where they’re used and what equipment they serve. Western Water and Gas Products specializes in:
- Outdoor regulators
- Propane regulators
- Service regulators
- Ventless regulators
- Natural gas regulators
- Auto changeover regulators
- Line regulators
- Appliance regulators
- Angled regulators
- Vented regulators
Choosing between Gas Regulators
Several factors can affect what gas regulator you select. These factors include:
The System You Use
Some systems work efficiently with single-stage regulators, while others only work when connected to a dual-stage regulator. Knowing and understanding your system will help you pick the right device. Our technical experts can also evaluate your system and recommend the best regulator for you.
The Gas Your System Uses
The type of gas your system uses will significantly influence your decision. Gasses react differently under specific pressures and temperature conditions. So, choose a gas regulator that can withstand the gas your system uses.
The Pressures Your System Applies
Gas regulators are designed to hold back flowing gasses. Normally, these gasses are pushed through the system under certain pressure. You need a gas regulator that can work properly despite the pressure that builds behind the closed gateway when the system shuts off the flow completely.
Are You Looking for Gas Regulators in Canada?
Western Water and Gas Products has the best genuine gas regulators in Canada. Our team of skilled regulator specialists will help you choose the best option for your system and fully customize the one that meets your needs.
To inquire about our products or make an order, call us at +1(604) 599-1900 or fill out our contact form.
$14.00
Seven Universe GR120-50 Low Profile Regulator 2psi
GR120-50C Seven Universe Low Profile Reg 2PSI 7-11 Spring 1/2 x 1/2REGULATOR 2 PSI 1/2" CONVERTIB...
GR120-50C Seven Universe Low Profile Reg 2PSI 7-11 Spring 1/2 x 1/2REGULATOR 2 PSI 1/2" CONVERTIBLE Natural Gas Regulator /LP Multi Position Mounting Horizontal or Vertical on the rise 120,000 BTU max Low Profile 3' x 4.5" CSA approved as line regulator 1/2 in and out Pressure tap on side 2 PSI to 7"-11' Spring w.c. 1/8 vent limiting
$21.00
Seven Universe GR400-75 Low Profile Regulator 2psi
Natural Gas Regulator /LP Multi Position Mounting Horizontal or Vertical on the rise 250,000 BTU ...
Natural Gas Regulator /LP Multi Position Mounting Horizontal or Vertical on the rise 250,000 BTU max Low Profile 3' x 4.5" CSA approved aas line regulator 1/2 and 3/4 in and out Pressure tap on side 2 PSi to 7"-11' Spring w.c. 1/8 vent limiting
$16.00
Seven Universe GR400- 50V Low Profile Regulator...
Natural Gas Regulator /LP Multi Position Mounting /side mounted Horizontal or Vertical on the ris...
Natural Gas Regulator /LP Multi Position Mounting /side mounted Horizontal or Vertical on the rise 250,000 BTU max Low Profile 3' x 4.5" CSA approved aas line regulator 1/2 and 3/4 in and out Pressure tap on side 2 PSi to 7"-11' Spring w.c. 1/8 vent limiting
$53.00
OARA R95 Regulator 2PSI to inches 3/4"
Regulator 2# to inches ( Natural Gas & Propane) Regulator 2# R95 OARA c/w vent Limiter & ...
Regulator 2# to inches ( Natural Gas & Propane) Regulator 2# R95 OARA c/w vent Limiter & Pressure Tap Size: 3/4" Capacity @ 1/2 psi: 364 cfh Capacity @ 2psi: 517 cfh
$16.00
Seven Universe GR400-50 Low Profile Regulator 2psi
Natural Gas Regulator /LP Multi Position Mounting Horizontal or Vertical on the rise 250,000 BTU ...
Natural Gas Regulator /LP Multi Position Mounting Horizontal or Vertical on the rise 250,000 BTU max Low Profile 3' x 4.5" CSA approved aas line regulator 1/2 and 3/4 in and out Pressure tap on side 2 PSi to 7"-11' Spring w.c. 1/8 vent limiting
$33.00
OARA R90 Regulator 2PSI to inches 1/2
Regulator 2# to inches ( Natural Gas & Propane) Regulator 2# R90 OARA c/w Vent limiter & ...
Regulator 2# to inches ( Natural Gas & Propane) Regulator 2# R90 OARA c/w Vent limiter & Pressure Tap Size; 1/2" Capacity @1/2 psi 155 cfh Capacity @ 2 psi 280cfh
$107.00
Pietro Fiorentini Governor F31051 1/2"
Pietro Regulator 2# w/ internal VL Specifications: Inlet pressure : 4 w.c. to 7 psig Outlet pr...
Pietro Regulator 2# w/ internal VL Specifications: Inlet pressure : 4 w.c. to 7 psig Outlet pressure range: 2 w.c. to 4.34 psig ( 2 w.c. to 2.18 psi for the compact models 30051-52-52) CSA Outlet pressures to 2 psig for Compliance Temperature class: -40 F to + 125 F Suitable for use with Natural Gas, LPG, Propane-air and any non corrosive gas. Available in wide size range: NPT threaded 1, 2; Flanged: 2, 3, 4 Features: Integral Vent Limiter Straight through (all sizes) or angel connec...
$218.00
Maxitrol R600S Natural Gas Regulator - 5# TO 7" WC
Maxitrol 1" NPT balanced valve gas regulator with 5 psi max inlet pressure, 3-6" WC outlet pressu...
Maxitrol 1" NPT balanced valve gas regulator with 5 psi max inlet pressure, 3-6" WC outlet pressure, and double diaphragm. R & RS regulators are for main burner and pilot load applications. They are ideal for use in industrial applications such as infrared heaters and on pilot lines for large process heaters and bakers. They may also be used in residential applications as appliance regulators. REG 1" 5# 3-6" set@4" NON LOCK 1400MBTU
$1,667.00
Bryan Donkin 274 Series Regulator Service 5PSI ...
*CSA 6.18 SERVICE REGULATOR AND CSA 6.22 LINE PRESSURE REGULATOR APPROVED 274SD-OPCO SD - SAFETY ...
*CSA 6.18 SERVICE REGULATOR AND CSA 6.22 LINE PRESSURE REGULATOR APPROVED 274SD-OPCO SD - SAFETY DIAPHRAGM VERSION WITH INTEGRAL OVER-PRESSURE SLAM-SHUT DEVICE AND INTERNAL VENT LIMITING DEVICES (INDOOR INSTALLATIONS ONLY) Features: Minimum Inlet Pressure: 1 PSI Maximum Inlet Pressure: 10 PSI Outlet Pressure Range: 6"WC - 3 PSI Size Range: 1-1/4" - 2" NPT, 2" Flanged also available Gases: Natural, Propane etc.. PARTS / ACCESSORIES: Bryan Donkin RMG 274R/LR/SD Regulator Springs Bryan ...
$1,376.00
Bryan Donkin 274 Series REG 5# TO 7"WC VENTLES...
*CSA 6.18 SERVICE REGULATOR AND CSA 6.22 LINE PRESSURE REGULATOR APPROVED 274SD-OPCO SD - SAFETY ...
*CSA 6.18 SERVICE REGULATOR AND CSA 6.22 LINE PRESSURE REGULATOR APPROVED 274SD-OPCO SD - SAFETY DIAPHRAGM VERSION WITH INTEGRAL OVER-PRESSURE SLAM-SHUT DEVICE AND INTERNAL VENT LIMITING DEVICES (INDOOR INSTALLATIONS ONLY) Features: Minimum Inlet Pressure: 1 PSI Maximum Inlet Pressure: 10 PSI Outlet Pressure Range: 6"WC - 3 PSI Size Range: 1-1/4" - 2" NPT, 2" Flanged also available Gases: Natural, Propane etc.. PARTS / ACCESSORIES: Bryan Donkin RMG 274R/LR/SD Regulator Springs Bryan ...
$1,887.00
Maxitrol 325-9AL210E 5# Regulator 2"
To comply with the ANSI Z21.80 Standard for Line Pressure Regulators, installations exceeding 2-p...
To comply with the ANSI Z21.80 Standard for Line Pressure Regulators, installations exceeding 2-psi nominal require a tested and approved over-pressure protection device (OPD) for use with the regulator. The 325 Series is suitable for limited horizontal mounting (less than or equal to 90° from upright). But when using the vent limiting device, the regulator must be mounted in a horizontal upright position. Install the regulator properly with gas flowing as indicated by the arrow on the castin...
$1,880.00
Maxitrol 325-9AL210E 5# Regulator 1-1/2"
To comply with the ANSI Z21.80 Standard for Line Pressure Regulators, installations exceeding 2-p...
To comply with the ANSI Z21.80 Standard for Line Pressure Regulators, installations exceeding 2-psi nominal require a tested and approved over-pressure protection device (OPD) for use with the regulator. The 325 Series is suitable for limited horizontal mounting (less than or equal to 90° from upright). But when using the vent limiting device, the regulator must be mounted in a horizontal upright position. Install the regulator properly with gas flowing as indicated by the arrow on the castin...